Titanium Tube, Titanium Square Tube,Titanium Welde

Roll over the image to zoom in

Posted On

28-Feb-18

Product Details

roperties
Nonmagnetic and Non-toxic
Excellent Bearing to cryogenic property
Good resistance to effect of heat
Excellent Corrosion Resistance
Low Density and High Strength
4. Process
The raw materials - Flat - end uncoiling shearing and welding - Welding - loop forming - both inside and outside the weld bead removal pre correction - induction heat treatment, sizing and alignment: eddy current testing - cut - pressure check final inspection, packing, pickling and shipment.
5. Chemical Requirements
Grade N C H Fe O Al V Pa Mo Ni Ti
GR 1 0.03 0.08 0.015 0.20 0.18 / / / / / bal
GR 2 0.03 0.08 0.015 0.30 0.25 / / / / / bal
GR 5 0.05 0.08 0.015 0.40 0.20 5.5~6.75 3.5~4.5 / / / bal
GR 7 0.03 0.08 0.015 0.30 0.25 / / 0.12~0.25 / / bal
GR 9 0.03 0.08 0.015 0.25 0.15 2.5~3.5 2.0~3.0 / / / bal
GR 12 0.03 0.08 0.015 0.30 0.25 / / / 0.2~0.4 0.6~0.9 bal
6. Physical Properties
Grade State Tensile strength(min) Yeild strength (min) Elongation (%)
Ksi MPa ksi MPa
GR 1 （M）Annealed 35 240 20 138 24
GR 2 （M）Annealed 50 345 40 275 20
GR 5 （M）Annealed 130 895 120 828 10
GR 7 （M）Annealed 50 345 40 275 20
GR 9 （M）Annealed 90 620 70 438 15
GR 12 （M）Annealed 70 438 50 345 18
7. Production specifications
Types OD (Outside Diameter)(mm) Wall Thickness (mm) Length
(mm)
Thin wall Tubes 3 - 133 0.5 – 12.0 Max. 12000
Thick wall Tubes 50 - 80 1.0 – 100.0 Max. 4000
Note: Non-standard sizes are also available.

View More